KDRJ-LW11
KDRJ-LW11
KDRJ-LW11
KDRJ-LW11
+
  • KDRJ-LW11
  • KDRJ-LW11
  • KDRJ-LW11
  • KDRJ-LW11

KDRJ-LW11


▪ Extreme operating temperature: -40°C to 70°C. In low-temperature environments, joint friction will increase significantly; in high-temperature environments, an over‑temperature alarm may be triggered, activating shutdown protection. ▪ Typical operating temperature: -10°C to 45°C, recommended for normal service conditions. ▪ Storage temperature: -30°C to 60°C, suitable for long-term storage.

sales@czkaidi.cn

Product Details

  • 产品描述
  • KDRJ-LW11-1
    Reduction ratio 51 101
    Rated torque (Nm) at an input speed of 2000 RPM for the reducer 3.2 4.8
    Maximum allowable torque (Nm) during reducer start-up and shutdown 7.8 10.5
    Rated torque (Nm) of the reducer at average load output 5.1 8.7
    Maximum allowable torque of the reducer at instant (Nm) 15 23
    Rated output speed (RPM) at reduced speed 69 35
    Peak output speed (RPM) under deceleration 118 60
    Reducer Backlash (Arcsec) ≤20
    Rated Voltage (V) 48 VDC (maximum 60 V)
    Rated Current (A) 4.0
    Encoder Dual encoders, single-turn absolute encoding, 24-bit resolution
    Drive board communication protocol CAN, CAN FD/EtherCAT (custom model)
    Outer diameter (mm) 52
    Hollow cable routing inner diameter (mm) 7
    Weight (g) 380

     

    Storage and Operating Environment

    Temperature range

    ▪ Operating temperature range: −40°C to 70°C. In low-temperature environments, joint friction increases significantly; in high-temperature environments, over‑temperature alarms may be triggered, activating shutdown procedures.

    ▪ Typical operating temperature: -10°C to 45°C; recommended for standard service conditions.

    ▪ Storage temperature: -30°C to 60°C, suitable for long-term storage conditions.

    Humidity and Vibration Resistance

    ▪ Operating and storage humidity: 20% to 80% RH, with no condensation allowed.

    ▪ Vibration resistance: acceleration of 24.5 m/s², vibration frequency range from 10 Hz to 400 Hz.

    Environmental constraints

    ▪ Exposure to dust, metal powders, corrosive gases, flammable gases, and oil mist is prohibited.

    ▪ For indoor use only; avoid direct sunlight.

    ▪ Applicable atmospheric pressure range: 86 kPa to 106 kPa.

Keywords: KDRJ-LW11

Previous Page

Next Page

Recommend Products

KDRJ-LW11

▪ Extreme operating temperature: -40°C to 70°C. In low-temperature environments, joint friction will increase significantly; in high-temperature environments, an over‑temperature alarm may be triggered, activating shutdown protection. ▪ Typical operating temperature: -10°C to 45°C, recommended for normal service conditions. ▪ Storage temperature: -30°C to 60°C, suitable for long-term storage.

Request A Quote

Get Your Customized Equipment Quote in 24 Hours – Global Solutions, Local Support.